The 120W and 100W ratings are the main difference
Both the 2G Dimmer / 120W / Cross / Black and the 2G Dimmer / 100W / Cross / Black are two-gang dimmer switches from Buster + Punch. The 120W model is explicitly rated to handle up to 120 W of lighting load. The 100W model's name indicates a 100 W rating, but the supplied catalog record does not include a wattage specification. Treat the 100W figure as the model name rather than a confirmed technical limit until you check the full product documentation.
If your lighting load is known and close to either figure, the 120W model gives you a documented ceiling. If your load is comfortably below 100 W, the 100W model may be suitable, but confirm its rating with the manufacturer before ordering.
What the catalog confirms about each dimmer
- 2G DIMMER / 120W / CROSS / BLACK: Handles up to 120 W of lighting load. This is the only confirmed wattage figure in the supplied records, so it is the safer choice when your load is near or above 100 W.

2G DIMMER / 120W / CROSS / BLACK - 2G DIMMER / 100W / CROSS / BLACK: A 2G dimmer switch in solid metal finished in durable, UV stabilised, PU paint. The 100W model's construction is described, but its wattage is not stated in the supplied record, so do not assume it matches the 120W model's rating.

2G DIMMER / 100W / CROSS / BLACK
Finish and detail kit options
The 120W model is available in Black, Brass and Steel finishes. The 100W model is listed with a Standard variant and comes with a choice of solid metal detail kits including a dimmer knob and coin screws in steel, brass, black, smoked bronze or white. If you want to match existing hardware or customize the look, the 100W model's detail kit range is broader. If you prefer a straightforward finish match, the 120W model's three finishes may be enough.
- 120W model finishes: Black, Brass, Steel.
- 100W model detail kits: Dimmer knob and coin screws in steel, brass, black, smoked bronze or white.
What the supplied information does not confirm
The 100W model's record does not include a wattage specification, compatibility with LED bulbs, or installation instructions. The 120W model's record confirms the 120 W load but does not state LED compatibility or minimum load requirements. Neither record confirms whether the dimmer works with smart bulbs or requires a neutral wire. Check the full product documentation or consult a qualified electrician before committing, especially if you are dimming LEDs.
How to choose between the two
Add up the wattage of the bulbs on each gang. If the total on either gang is above 100 W, choose the 120W model because its rating is confirmed. If the total is well below 100 W, the 100W model is a reasonable option, but verify its rating with the manufacturer first. If you want a documented load ceiling and a simple finish choice, the 120W model is the clearer pick. If you want to customize the look with detail kits, the 100W model offers more options, but confirm its wattage before you buy.



