DETAIL KIT / EXHAUST / LINEAR: What's in the Box and How to Fit It
By Home Fashion Label - Extraordinary Products - Buster + Punch | Published: 2026-11-04
Category: How-to Guides
The DETAIL KIT / EXHAUST / LINEAR is a solid metal baffle that refines your EXHAUST light. Here's what it includes and how to fit it correctly.
Quick answer
The DETAIL KIT / EXHAUST / LINEAR is a solid metal baffle that fits your EXHAUST lighting fixture to customize its look. It includes matching Torx screws, so you can install it with a Torx driver in a few minutes.
Why the baffle is solid metal, not a plastic trim
Because the baffle is machined from a single piece of solid metal, it adds a precise, durable finish that won't flex or warp like thinner materials. That also means it has a bit of weight, so handle it over a soft surface during fitting to avoid chips or scratches.
The matching Torx screws are part of the kit, so you don't need to source separate fasteners. Use the correct Torx bit size to avoid stripping the heads.
When the kit won't solve a fit problem
This kit is designed specifically for the EXHAUST lighting fixture. If you're working with a different pendant or ceiling light, the baffle won't align with the mounting points. Check your fixture model before ordering.
The kit does not include a Torx driver or any electrical components. If your fixture needs rewiring or a new bulb, address that separately before fitting the baffle.
How to fit the DETAIL KIT / EXHAUST / LINEAR
- Power off and let the fixture cool: Switch off the circuit at the breaker and wait until the EXHAUST light is completely cool before touching it. Confirm the breaker is off, not just the wall switch.
- Unpack and check the kit: Lay out the baffle and the matching Torx screws on a soft cloth. Check that the screw count matches the mounting holes on your fixture. If any screw is missing, stop and contact the retailer before proceeding.
- Remove the existing trim or baffle: If your EXHAUST fixture already has a trim ring or baffle, unscrew and remove it carefully. Keep the original screws in a bag in case you need to refit it later. Don't force a stuck trim; check for a hidden retaining clip or screw.
- Align the new baffle: Hold the DETAIL KIT baffle against the fixture opening and rotate until the screw holes line up. The baffle should sit flush without gaps. If the holes don't align, you may have the wrong fixture model—stop and verify.
- Secure with the Torx screws: Start each screw by hand to avoid cross-threading, then tighten with a Torx driver until snug. Don't overtighten, as this can distort the metal or strip the heads. Snug, not torqued—solid metal needs less force than you think.
- Restore power and test: Turn the breaker back on and switch on the light. Check that the baffle sits evenly and doesn't rattle or cast uneven shadows. If the light flickers or the baffle is loose, power off and recheck the screws.
Product facts
- DETAIL KIT / EXHAUST / LINEAR: Precision-engineered baffle crafted from solid metal for the EXHAUST lighting fixture. Solid metal construction gives a rigid, long-lasting trim that holds its shape and finish over time.
DETAIL KIT / EXHAUST / LINEAR - DETAIL KIT / EXHAUST / LINEAR: Comes with matching Torx screws for a secure, tool-tightened fit. You have the correct fasteners in the box, so installation doesn't stall on a hardware run.
