What This Guide Covers
This guide explains how to install a Buster + Punch TV module coaxial wall plate (male screened co-axial, 25 mm). You will learn what the module includes, which wall plates it fits, and the steps to connect it securely. The information is based on the product's supplied specifications and compatibility notes.
Key Product Facts for Installation
- TV MODULE / MALE SCREENED CO-AXIAL / 25MM: Single male TV outlet with IEC connection. The IEC connection is the standard for TV aerial cables, so you can attach a standard coaxial cable directly.

TV MODULE / MALE SCREENED CO-AXIAL / 25MM - TV MODULE / MALE SCREENED CO-AXIAL / 25MM: Screened connection to prevent RF signals interfering with the reception. The screening reduces signal interference, which is important for maintaining clear TV reception in areas with many electronic devices.
- TV MODULE / MALE SCREENED CO-AXIAL / 25MM: Compatible with Buster + Punch UK 50mm Euro Plates. You need a 50 mm Euro Plate to mount this module. It will not fit UK 45 mm Module Plates or EU Electricity Plates.
Installation Steps
Before starting, ensure you have the correct wall plate (UK 50 mm Euro Plate) and a standard coaxial cable with an IEC connector. Turn off power to the circuit if you are working near other wiring.
- 1. Prepare the wall plate: Select a Buster + Punch UK 50 mm Euro Plate. Confirm that the plate has a cutout or opening for a 25 mm coaxial module. The module is designed to fit this plate size.
- 2. Connect the coaxial cable: Attach the coaxial cable's IEC connector to the male TV outlet on the module. Push firmly until the connector clicks into place. The screened connection will help prevent RF interference.
- 3. Mount the module into the wall plate: Insert the module into the wall plate opening. Secure it according to the plate's instructions (typically using screws or clips). Ensure the module sits flush and the cable is not pinched.
- 4. Install the wall plate: Attach the wall plate to the wall box or mounting surface. Follow the plate's fitting instructions. Once secured, connect the other end of the coaxial cable to your TV or set-top box.
Compatibility Check
The TV module is compatible only with Buster + Punch UK 50 mm Euro Plates. It is not compatible with UK 45 mm Module Plates or EU Electricity Plates. If you have a different plate size, you will need a different module or plate. The module is available in Black and White finishes, so choose the one that matches your wall plate and decor.


