Back to Blog
How-to Guides 2026-11-16 Home Fashion Label - Extraordinary Products - Buster + Punch 0 views

Satellite Module 25mm: What It Does and Where It Fits

Satellite Module 25mm: What It Does and Where It Fits

A practical guide to the Buster + Punch Satellite Module 25mm: what its screened F-type port does, which plates it fits, and how to plan its place in a modular switch layout.

The module is a signal connection, not a switch

The Satellite Module 25mm is a single satellite F-type female connection port. In a modular switch setup, it gives you a dedicated connection point for a satellite signal rather than another lighting control. That distinction matters before you order: if you are planning a bank of dimmers or toggles, this module is not one of them.

The port is screened to prevent RF signals interfering with reception. That screening is the practical reason to choose this module over a generic connection point when the signal path sits close to other electrical modules in the same plate.

What the catalog confirms

  • SATELLITE MODULE / 25MM: Single satellite F type female connection port, screened to prevent RF signals interfering with reception. This is the core function: one F-type connection, screened against interference, for satellite signal distribution.
    SATELLITE MODULE / 25MM
    SATELLITE MODULE / 25MM
  • SATELLITE MODULE / 25MM: Compatible with Buster + Punch UK 50mm Euro Plates. The plate is the deciding factor. This module is designed for the 50mm Euro plate system, so check your plate before ordering.
  • SATELLITE MODULE / 25MM: Not compatible with UK 45mm Module Plates or EU Electricity Plates. If you already own 45mm module plates or EU electricity plates, this module will not fit them. The catalog states this explicitly.

Why the 50mm plate rule decides the purchase

The most common mistake with a 25mm satellite module fitting is assuming that any modular plate will accept it. The catalog is clear that compatibility runs to UK 50mm Euro Plates and stops there. UK 45mm Module Plates and EU Electricity Plates are listed as incompatible.

So the first check is not the module, it is the plate you intend to use. If your existing plate is a 50mm Euro plate, the module is a candidate. If it is a 45mm module plate or an EU electricity plate, this module is the wrong part regardless of how the rest of the layout looks.

Checks before you commit to a layout

These are the decisions the supplied information supports. Anything beyond them, such as cable routing or wall-box depth, is not confirmed by the catalog and should be checked against the technical specification or with your installer.

  • Confirm the plate system: The module is compatible with Buster + Punch UK 50mm Euro Plates only, per the catalog. Confirm the plate model before ordering.
  • Plan the module's role in the plate: This is a satellite F-type connection, not a lighting control. Place it where a signal connection is needed, alongside switch or dimmer modules rather than in place of one.
  • Decide the finish: The module is offered in Black and White. Choose the finish against the plate and the surrounding modules so the plate reads as one unit.
  • Check the technical specification for anything else: The catalog points to the tech spec for more information. Use it for details the supplied summary does not cover rather than assuming them.

What satellite module spacing means in practice

Spacing questions usually come up when a satellite module shares a plate with other modules. The supplied information does not give recommended distances or clearances, so there is no catalog figure to quote for satellite module spacing.

What you can do is treat the module as one position in the plate layout and settle the arrangement before fitting. If the plate carries several modules, decide the order on the plate first, then check the technical specification for any dimensional detail you need. Do not rely on a spacing figure from a different module family, because the compatibility rules here already show that plate systems are not interchangeable.

Small module wiring placement: what is and is not confirmed

For small module wiring placement, the honest answer is that the supplied catalog summary does not include installation steps or wiring instructions. It confirms the connection type, the screening and the plate compatibility, and it directs you to the technical specification for more.

That is not a reason to guess. Use the technical specification for the wiring detail, and if it does not answer your question, treat that as an open item to resolve before installation rather than filling the gap with assumptions. The one placement fact the catalog does settle is the plate: a 50mm Euro plate is the supported home for this module.

An honest note on price and scope

The catalog lists the Satellite Module 25mm at USD 20.70 against a comparison price of USD 30.00. That makes it a relatively low-cost way to add a screened satellite connection to a 50mm Euro plate layout you are already building.

The trade-off is scope. This is a single-purpose module with a defined plate compatibility, not a universal adapter. If your layout uses 45mm module plates or EU electricity plates, the saving is irrelevant because the module will not fit. Buy it when the plate is right and the connection type is what you need; skip it when either of those is uncertain.

Related Articles

Customer Service
Home
Products
Cart
Profile